1- REQUIREMENTS
Step 1: 3D printer used and configuration:
Help Block
I'm using the MK4, but if you have an MK3S+, that works just as well. The advantage of the MK4 is that bed leveling is automatic, and the load cell on the nozzle ensures perfect printing without optimal settings.
Step 2: Settings:
- Plastic: PETG
- Infil: 60%
- Solid layers:
- Top: 6
- Bottom: 5
- Minimum shell thickness:
- Top: 0.7mm
- Bottom: 0.5mm
Caution
When printing with PETG, it is imperative to use the textured build plate. Attempting to print PETG on a smooth bed may risk damaging the bed when removing the print after printing.